Flextronics Placement Papers to Download in PDF and Word Format

FLEXTRONICS PAPERSection C1. An lead compensator zero is at Z=Zc, pole is at P=Pc then the following is correct a. Pc > Zc, pc< 0, zc< 0 b. c.2. gain margin of g(s)h(s)=1/s(s+k); a. sqrt(1+k2) b. 0 c. infinity d. 13. machestor code does not improves a. clock recovery b. bandwidth efficiency c.4. possion distribution is used for a. used in FSM b. c.used for queuing delay system of mutually identical events of arrival d. both a and c5. no.of filpflops for mod 11 counter a. four b. five c.6. no.of filpflops for mod 11 counter a. four b. five c. 7. if even parity is used for parity generation, what is the hamming distance (simple fig is given) ans:28. the code set is {00000,00111,11100,11011} what...

Hi friends!!!!I,m VIVEK KUMAR JHA,MCA student of SRM UNIV CHENNAI. I,m here to share my xperience of the caMPussing procedure conducted by NEWGEN on 4TH FEB,2010.ELIGIBLE BRANCHES:CSE,IT,MCACRITERIA-THROUGH OUT 70%The selection procedure is of 4 rounds..total ques was 40.(30 min)First is written testSecond is gd roundThird is personal interviewfourth is technical roundIN WRITTEN TEST THERE WAS 3 SECTION .Written test consists of THESE TYPE:::::::;1st(15 ques)-frm english based upon grammar(tense),fill in the blanks.the word was given.there was no any option.2nd(15 ques)-frm logical reasoning bt question was also frm math.3rd(10 ques)-frm technical(related to hardware,which was theoratically.)there...

  FLEXTRONICS PAPER Section C 1.                  an lead compensator zero is at Z=Zc, pole is at P=Pc then the following is correct      a.  Pc > Zc, pc< 0, zc< 0  b.  c. 2.                  gain margin of g(s)h(s)=1/s(s+k);  a.   sqrt(1+k2)  b.   0  c.    infinity  d.    1 3.                  machestor code does not improves                                                                   ...

FLEXTRONICS PAPER & INTERVIEW  ON  14th AUGUST 2006 Hi Frnds,Here is the pattern of Flex on 14 July ,06. I don,t remember all the questions.SECTION 1 - VerbalIt includes very simple english. 3 questions on the correct usage of a, an, the, for, to. (15 questions in 10 minutes). It was very easy. Key is to be calm and attempt it. I was able to complete in 7 mins.SECTION 2 - APTITUDE3 pattern matching questions like 3 digits are given and find out which 3 are similar. Then general maths like if * is replaced by -, - is replaced by + , + is replced by / and / is replaced by *. then whcih is true.The only good questions from this sections was---There is a red cube and it is cut into...

FLEXTRONICS PAPER ON 30th July 2006 AT KOLKATA   Hi Friends.             I have written Flextronics(off campus-freshers) exam on 30-07-06.             The paper was easy and as usual it contains 7 sections. 1.verbal section: Simple Questions like fill the blank with right prepositions,synonims(endeavour,innovative;i managed to remember only these two) and articles.it also contains comprehension passage with five questions.   2.quantative aptitude: a)in a class of 100 students 60 speak english,40 speak french n 20 speak both.how many of them doesnot speak bot; the question is...

FLEXTRONICS PATTERN - APR 2006 Dear Friends,I want to share my flextronics experience. it was of campus recruitement. only few colloges students were allowed to give the test. among them also they shortlisted the candidates and called for test.   written test was of 90 mins. 7 sections were there as...   english grammer(like fill in the blanks, synonyms etc), comprehension, email writing, aptitude,reasoning, Data structure & c / C++, operating system.i think there is certain cut off in each section.after each section they were taking the paper and giving the next section. so it was just about speed ,timing andconcentration.        ...

FLEXTRONICS PAPER - 28 MAY 2005  I gave written test of Flextronics . I want to help You, as I have not remembered the Questions I am just giving the pattern .  There are total Seven sets of papers . The exam duration is 1hr 40 mts.  Set 1 - Verbal Ability [15Q - 15mts] Set 2 - Analytical Ability [15Q - 20mts] Set 3 - Mental Ability [10Q - 10mts] Set 4 - Technical [20Q - 20 mts] (Data Structures, Operating System) Set 5 - paper of C/C++ [20Q - 20 mts] (Our choice , U will have only 1 paper.) Set 6 - Reading Ability. [10Q - 15mts] (They will give a passage u have to read in 10 mts. and they will take back passage. now they will give...

FLEXTRONICS PAPER - MAY 2005 Hai all, Here is the Hughes Paper( now FLEXTRONICS). There are two sections of the written test. First is the general aptitude test(30 ques) (generally it is the quantitative aptitude . R.S. Agrawal (non-verbal and quantitative) should be done. Second is the technical section(u can attempt either electronics or computer one). There are good C, C++, Java questions in the Computer section and microprocessor, computer architecture and C, Java questions in Electronics section.  They declare the result within an hour or two. Then the interview is as per the schedule. The interview is the technical one. They ask C, C++, datastructures questions and...

Aptitude Questions Age problem Time and distance Coin direction problem (2n + 2 n-1/2 n+1 2n) what is gives if n = something ( 10n 1) n>1 when is divisible by 11.no divisible by 8 find the missing no. when it is divisible by some no  Boat problem Average            Technical Questions Which one is called family tree virtual function and overloading DHCP protocol order of insertion and Heap sort                                         ...

 Hughes test conducted at Gurgaon           The paper contains the two sections         Section 1 (20 ques) contains all the questions related to quant,s, simple mathematics, and          simple logical question. so asfar as theis section is concern u don,t need any extra book          only R.S Aggarwal is sufficient. Section 2(30 ques) coice b/t CS paper and Electronics paper.    nice(,val,)? unix command  for(l=1;a<=l;a++)     cout<<++a;cout<<a;                                                                                                ...

section A 30m (Compulsary)  section B or C 20 m(changed )m  Attempt either B or C sec B contains CST C E&C  Better to attempt Electronics paper (Those who are having electronics background)   Section A Which of the folowing is not correct   a. (x+y),=x,.y, b. (x,+y,),=x.y   c. (x,.y,),=x+y d. (x,+y,),=x,.y, [d] Question on logic ckt. U have to find the output    ans. AB,+CD,+EF, Output of MUX        _________      c-----| |      c,----| |-------Y      c,----| | ans. A xor B xor C      c-----| |---------              ...

Sample Questions          What is max. no. of hops in hypercube n/w with n (=2 ^ p) to go from one node to another ?      a. p      b. log p      c. n ^ 2 What is Kerberos ?    ans. Authentication Protocol. In completely connected multiprocessor system with n processors , links will be of the order of   a. O(n ^ 2)   b. O(2 ^ n)                                                                                                ...

section A:30 bits  section B:20 bits  section C:20 bits  section A is compulsory  attempt either section C or section B   for electronics background,it is better to attempt  sec B     Section C an lead compensator zero is at Z=Zc, pole is at P=Pc then the following is correct      a.  Pc > Zc, pc< 0, zc< 0  b.  c. gain margin of g(s)h(s)=1/s(s+k);  a.   sqrt(1+k2)  b.   0  c.    infinity  d.    1 machestor code does not improves                                                                   ...

Sample Questions         What is max. no. of hops in hypercube n/w with n (=2 ^ p) to go from one node to another ?      a. p      b. log p      c. n ^ 2 What is Kerberos ?    ans. Authentication Protocol. In completely connected multiprocessor system with n processors , links will be of the order of   a. O(n ^ 2)   b. O(2 ^ n)                                                                                             ...

section A:30 bits  section B:20 bits  section C:20 bits  section A is compulsory  attempt either section C or section B   for electronics background,it is better to attempt  sec B     Section C an lead compensator zero is at Z=Zc, pole is at P=Pc then the following is correct      a.  Pc > Zc, pc< 0, zc< 0  b.  c. gain margin of g(s)h(s)=1/s(s+k);  a.   sqrt(1+k2)  b.   0  c.    infinity  d.    1 machestor code does not improves                                                                ...