Rajasthan Technical University MTech, M.Arch Admission 2018

Rajasthan Technical University (RTU) MTech/ M.Arch Admission 2018 – Rajasthan Technical University (RTU), Kota invited applications for Admissions would be made through Centralized Admission for M.Tech/M.Arch for the academic year 2018-19

Details of M.Tech/ M.Arch Program (CAM) 2018

  • M.Tech admissions in all the affiliated and constituent Engineering Colleges of Rajasthan Technical University (RTU) would be made through Centralized Admission for M.Tech/M.Arch (CAM‐2018)
  • CAM-2018 is conducted by RTU Kota (Rajasthan)
  • This Information Brochure is helpful for the candidates seeking admission in the first year of Postgraduate Programs leading to Master’s degree in Govt. Aided & Private Unaided Technical Institutions of Rajasthan (except BITS Pilani, MNIT Jaipur & other Deemed & Private Universities) through Centralized Admission for M. Tech./M.Arch (CAM-2018)
  • Candidates shall read this brochure carefully before applying for CAM-2018

Rajasthan Technical University MTech, M.Arch Admission 2018

Eligibility Criteria

  • Admissions for the session 2018-19 will be based on of valid and eligible GATE Score of the year 2017/2018 preferably. However, candidates without GATE score but possessing B.E./B.Tech. degree or equivalent can also apply. It is important to mention here that the scholarship offered in M.Tech/M.Arch.for GATE qualified candidates shall be as per AICTE norms which is 12400/- per month for 24 months
  • Candidates appearing in qualifying degree exams in the academic session 2018- 19 and possessing valid GATE score card need to submit the marks sheet of qualifying degree exam at the time of reporting to the allotted institute positively, failing which their candidature shall be cancelled
  • A candidate must ensure their eligibility for admission in various MTech./MArch. Programs in the affiliated institutions and University Departments of RTU Kota before filling up the application form of CAM-2018
  • If a non-eligible candidate is admitted due to any reason, then the admission of such candidate will be cancelled even at the later stage

Minimum Qualification Required

  • Candidates seeking admission for M.Tech./M.Arch. Program must ensure following minimum qualification
  • A candidate must hold B.E./B.Tech. degree in appropriate discipline mentioned in below from RTU or any other recognized University/Institution or any other exams recognized as equivalent thereto by competent authority
  • Candidate must have minimum 55% (6.25 CGPA on 10 points scale and equivalent) marks in the qualifying degree exam(50% or 5.75 CGPA on 10 points scales of relaxation is admissible for SC/ST candidates)
  • If a recognized university has an approved conversion formula of CGPA into percentage then it will be applicable on producing the certificate of conversion
  • Candidates having B.Arch. degree and seeking admission to M. Arch/M. Plan Programs should possess 50% (5.75 CGPA on 10 points scale and equivalent) and 45% (5.25 CGPA on 10 points scale and equivalent) in case of SC/ST, as per requirement of COA
  • Candidates having M.Sc./MCA seeking admission to certain M.Tech. Programs should possess valid and qualified GATE score of the relevant branch. The equivalency of any degree for admission to any program will be decided by University
  • Computer Science: B.E. or B.Tech in Computer/Information Technology, MCA (Mathematics as optional in UG)/M.Sc (Information Technology)/M.Sc (Computer Science)
  • Control &Instrumentation: B.E. or B.Tech in Electronics/Applied Electronics/Electronics and Communication/Biomedical Engineering /EI&C/ Electrical and Electronics
  • Digital Communication: B.E. or B.Tech in Electronics/Applied Electronics/Instrumentation/Electronics and Communication/Biomedical Engineering /EI&C/M.Sc (Electronics)/ Electrical and Electronics
  • Environmental Eng.: B.E. or B.Tech in Civil/Chemical/Mechanical/Metallurgy/Agriculture/Bio-Medical/ Petro Chemical/All B.Tech Branches engineering entrance exam
  • Geotechnical Eng.: B.E. or B.Tech in Civil/Agriculture
  • Industrial Mgt. &Eng. (IME): B.E. or B.Tech in Production and Industrial/ Mechanical/ Automobile/Aero Space/Agricultural/Chemical/Computer Science/Electronics and Communication/ Electrical/ Information Technology/Mining/Industrial/M.Sc (Maths) with 60%
  • Information Technology: B.E. or B.Tech in Computer/ Information Technology
  • Machine Design: B.E. or B.Tech in Mechanical/Production and Industrial/Automobile/Aero Space Engineering
  • Nanotechnology (Chemical): B.E. or B.Tech in Chemical, Environment, Biomedical, Biotech, Food Technology and Pharmaceutical Chemistry;
  • Nanotechnology (Electromechanical): B.E. or B.Tech in Electronics and Communication, Electronics and Instrumentation, Electrical, Mech, Production and Industrial, Electrical and Electronics, Automobile and Production;
  • Nanotechnology (Structures): B.E. or B.Tech in Civil and Structures and B.Architecture;
  • Nanotechnology (Textile): B.E. or B.Tech in Textile Technology, Textile Engineering, Textile Chemistry
  • Power System:Electrical/Electrical and Electronics Engineering/EIC/Applied Electronics
  • Production Engineering: B.E. or B.Tech in Production and Industrial/Mechanical/ Production/Metallurgy
  • Renewable Energy Technology: Any branch of Engineering (B.E. or B.Tech)/M.Sc (Physics) with 60%
  • Software Engineering: B.E. or B.Tech in Computer/ Information Technology
  • Structural Engineering: B.E. or B.Tech in Civil/Mechanical
  • Textile Technology: B.E. or B.Tech in Textile Technology/Textile Engineering/Textile Chemistry
  • Thermal Engineering: B.E. or B.Tech in Mechanical/Automobile/Aero Space/Energy/Chemical
  • VLSI Design: B.E. or B.Tech in Electronics and Communication/Applied Electronics/Computer Engineering
  • Transportation Engineering: B.E. or B.Tech in Civil
  • Power Electronics &Electrical Drives: B.E. or B.Tech in Electrical

Reservation of Seats

  • As prescribed by the Govt. of Rajasthan (except in case of Private unaided Institutions and 50% seats in the self-finance course of the aided institutions) the reservation of seats will be made subject to the prevalent statutory provisions of the State of Rajasthan viz. 16% for SC candidates, 12% for ST candidates, 21% for candidates belonging to non- creamy layer OBC category and as per govt. directive for non-creamy layer SBC candidates
  • As per the State Govt. order no. F1(6)/Tech.Edu./1999 Jaipur Dated 15-09-2011, the 45% seats of prescribed 12% ST quota will be reserved for TSP in all institutions where ST reservation is available
  • Provision will also be made for horizontal reservation of 3% for candidates belonging to person with disability (PwD), 25% for women category and 3% for dependants of Defence Killed/Ex- servicemen/Gallantry award winners

Registration Fee

  • A candidate is required to pay the registration fee of CAM-2018, which is Rs.3000/- (Rs.1500/- for SC/ST category) and can be submitted online through Bill desk gateway facility with addition of credit card/debit card/net banking/other online payment gateway charges, as applicable
  • In the payment mode through Bill desk, a candidate is advised to take note of the transaction ID and keep the receipt/transaction Id details safely for further use

Application Process

 

  • Candidates seeking admission to Master of Technology (M. Tech.) Program in affiliated/University departments of Rajasthan Technical University shall participate in the CAM-2018
  • Application Form is to be submitted online on http://www.rtu.ac.in/RTU/cam2018
  • Candidate must fill all the details carefully as required in the online application form
  • Stage I: Online registration and fee payment,
  • Stage II: Filling of application form,
  • Stage III: Uploading the documents, online choice filling and locking
  • Stage IV: Seat allotment,
  • Stage V: Physical reporting and admission in the allotted institutes
  • The process of online submission of Application Form for CAM-2018 shall be carried out through the following web site www.rtu.ac.in/cam

Important Dates for Admissions in MTech. /M. Arch. Programs (CAM – 2018)

  • Advertisement for notification of CAM 2018: 10th June 2018

FIRST ROUND

  • Online Registration and fee payment starts: 15th June 2018
  • Online application form filling starts: 15th June 2018
  • Online choice filling for different M. Tech. programme starts: 15th June 2018
  • Training of admission coordinators of participating institutes at RTU Kota: 23rd June 2018
  • Last date of online process (S. No. 2-4) ends: 05th July 2018
  • Declaration of 1st round of allotment: 10th July 2018
  • 1st round of reporting & course fee payment to the allotted Institute: 11th-14th July 2018
  • Last date of surrender from 1st round of allotment and surrender of seat (for reported candidates only): 11th -14th July 2018
  • Last date of consent for the upward movement online to participate in second round: 1th -14th July 2018

SECOND ROUND

  • Declaration of 2nd round of allotment: 17th July 2018
  • 2nd round of reporting & course fee payment to the allotted Institute: 17th-21st July 2018
  • Last date of surrender from 2nd round of allotment and surrender of seat (for reported candidates only): 17th-21st July 2018
  • All activity freezes for 1st and 2nd round: 21st July 2018

THIRD ROUND

  • Declaration of new seat matrix against the vacant seat for fresh registration of 3rd round: 22nd July 2018
  • Declaration of 3rd round of allotment: 28th July 2018
  • 3rd round of reporting & course fee payment to the allotted Institute: 28th July-31st July 2018
  • Last date of consent for the upward movement online to participate in 4thround: 28th July-31st July 2018

FOURTH ROUND

  • Declaration of 4th round of allotment: 02 August 2018
  • 4th round of reporting & course fee payment to the allotted Institute:  02nd – 04th Aug. 2018
  • Last date of surrender from 4th round of allotment and surrender of seat (for reported candidates only): 02nd – 04th Aug. 2018
  • Classes Start for all M. Tech Courses:  01st August 2018
  • All activity freezes for 3rd and 4th round:  04th August 2018

FIFTH ROUND

  • Declaration of the schedule of the SPECIAL ROUND if required against the vacant seat: 06th August 2018

Rajasthan Technical University (RTU) Kota

Admission Office, CAM-2018, Old Computer Center building, Rajasthan Technical University, Rawatbhata Road, KOTA (Rajasthan) – 324010 Phone No: 0744-247-3845

View More Details

 

Reply to this rojgar