SASKEN Sample Placement Papers for Freshers for Job Interview

List of SASKEN placement papers for freshers. SASKEN Written exam papers for jobs in interview. Sample model pa
These are the programmaing Questions 1.How Jk F/F can be converted into T F/F.2.Difference between display and write in Verilog.?3.ASIC flow steps? (RTL design ->Functional Verification->Synthesis ->STA->Place and route)4.Difference between Latch and F/F?Which is faster?5.Difference/Comparison between DRAM and SRAM?6.what happens to Vth if temp Increases>?7.In a negative feedback control System ,If feed factor Increases what happens to Gain and Bandwidth?8.NMOS and PMOS will pass which value without…
Sasken PAC on line test on C programming. It consists three sectionsTime duration:90 Minutesa)Basic Cb)Advanced Cc) Expert CSecond and Third RoundSasken Technical and HR InterviewSome of Interview Questions are:1. Tell me about your self ?2. Tell me about your project ?3. What is difference between enum & union in C (not structure & union) ?4. What is the specific use of union in C i.e particular application of union ?5. What are the Universal gates? why? Implement X-OR & OR gate from that ?6. What…
during the campusing at C-DAC ACTS Pune held on 29th & 30th February 2012. Here, I have tried my best to help you guys by giving information about the pattern used by SASKEN. There was no negative marking but there was individual cut-off marks for each section (in written round)Sasken Test Pattern1. Written test2. Technical interview3. HR interview4. Personal Interview (just as a formality, in this part of interview they will ask, whether you agree with the bond or not and finally they will give…
Sasken InterviewIt was one and hour paper. It has got three sections. Total Marks 601.Multiple Choices.2.TRUE and False.3.DescriptiveFollowing are section 1 and section2 questions.1.How Jk F/F can be converted into T F/F.2.Difference between display and write in Verilog.?3.ASIC flow steps? (RTL design ->Functional Verification->Synthesis ->STA->Place and route)4.Difference between Latch and F/F?Which is faster?5.Difference/Comparison between DRAM and SRAM?6.what happens to Vth if temp Increases>?7.In…
1.written test 2.technical interview 3.HR interview 4.personal interview(just as a formality, in this part of interview they will ask , whether you agree with the bond or not and finally they will give you an offer letter).written test comprises of 65 questions having three different sections 1)English 2)verbal & non-verval reasoning 3) c & c++ questionsThere were two paragraphs (5*2=10 marks) and synonyms(5 marks).IN reasoning part, ..........there were 2 puzzles(5*2=10 marks) and the other questions…
1.Written test2.Technical4.H.R-15.H.R-2(Finalising round)Written Test: 65 questions in 75min.(1 1/4 hr)-No Negative marking.Each one carries 1mark.Question paper is different for ECE & CSE.This paper is for ECE students. There were two sets of question papers. For us it started around 9.40 AM & ends by 10.55 AM.There were three sections (No core subjects in written).1.Verbal ability-15ques:15min 5ques on synonyms.i,e italic word in a sentence must be replaced by a synonym.Two technical passages…
1.WRITTEN ROUND----guys this round was really tough.......b prepared well.......There r 5 section . each section has individual cutoff......there is no negative marking......it contain 110 questions...in 110 minute.....brief desription of written r-----sectiona.)Analytical Reasoning......containing 30 ques....it contain calculation base questions.........based on data interpretation.........it also contain some of the ques based on apty........I cann,t remember any questn but ques were not so tough....b.)Verbal…
1. Aptitude test ( English - 20 question in 20 minutes,Maths-30 questions in 30 minutes,C programming-30 questions in 30 minutes and Computer sc.- 30questions in 30 minutes. the last section will b deifferent according to the branch for which u r opting the test. as i m from CSE thats why my paper was CSE paper)2.The shortlisted candidates were grouped into GD groups. as only 150 to 180 students were selected from apti test, the GD was called off, and we r selected for technical interview. there…
Written Test:It was further divided into 3 categories (No sectional cut-off and no -ve marking): 1. English / Comprehensive part (15 Questions): This part includes synonyms, comprehensive passages etc. This part was not at all difficult and no preparation for this part is required according to me. 2. Verbal / Analytical abilities(25 Questions): This part was also easy and Verbal & Non-Verbal Reasoning by R.S. Aggarwal is enough to practice this part(however non verbal part is not required for SASKEN).…
Their requirement was for RTOS-Nuclius, Linux and Symbian. They have given test(C or C++ your choice) timing for different people(nerly 100 people each batch-total 3 batches were there. I have chosen ,C, test paper (set1 & set2), which consists 25 questions,45 minutes: 1. void main() { 200; printf("Typical Problem"); return 0; }Output : "Typical Problem".// NO warnings & NO Error. void main() { int a=-60,b=-34; unsigned int c=-24; printf("%d",c); return 0; } Ans : WARNING: initialized to negative…
Hi! Friends, i have attended for SASKEN 1+ walk-in recruitment drive at Corporate office,Domlur ring road, Bangalore on 13th December-2009. Their requirement was for RTOS-Nuclius, Linux and Symbian. They have given test(C or C++ your choice) timing for different people(nerly 100 people each batch-total 3 batches were there. I have chosen ,C, test paper (set1 & set2), which consists 25 questions,45 minutes: 1. void main() { 200; printf("Typical Problem"); return 0; }Output : "Typical Problem".//…
SASKEN PAPER ON 22ND SEPTEMBER AT NETAJI SUBHAS(TECHNO INDIA)The paper has 65 questions .There was sectional cutoff but no negative marking .1st section is verbal ability-15 marks , 2nd section was analytical ability-25 marks , c language -25 marks total time will be provided to us 85 minutes. the c section was very tough , there was ques which ask for output some program was given we have to choose correct alternative for a single output .it is a pull campus held on 22-9-08 on Netaji Subhas (Techno…
SASKEN PAPER ON 25th AUGUST Hii friends......... I am Sandeep Mukherjee.......iet lucknow.......with IT branch want to share my experience in sasken communication .......I had gone through sasken off campus recuritment....yesterday and got selected .........1.WRITTEN ROUND----guys this round was really tough.......b prepared well.......There r 5 section . each section has individual cutoff......there is no negative marking......it contain 110 questions...in 110 minute.....brief desription of written…
SASKEN PAPER ON 2nd JUNE HI guys.!!! I m avijit from kolkata. I m very happy to inform u that i got selected for Sasken Comunication technology on 2nd June,07. Its really a heavenly moment for me. I wanna share some my experiences with u. Sasken is a very recognised company in the IT industry, specially in the Telecom, comunication industry.The Procedures for selection are as below,1. Aptitude test ( English - 20 question in 20 minutes,Maths-30 questions in 30 minutes,C programming-30 questions…
SASKEN COMMUNICATION INDIAThere are 10 ques. in three sections each, thus total 30 ques. 4 choices were given. 1 mark for each ans. no negative marking.1 if phase of different frequency components of signal vary linearly then they all reach destination with delay1) delay also vary linerly.2) no change in delay,3)2 what is the relation in dbm and db?1) same2) dbm is 10 times db3) db is 10 times dbm4) db is relative measure and dbm is absolute measure.3 difference in PSK and QPSK a. slower sample…
Sasken Exam 20th Jul 2004Pattern : C(10 Qs) + Aptitude(10 Qs) + Discpline based[CS/EC](10 Qs)Duration : 1 HrC questions------------1.Consider the following declaration:-char const *p = ,d,;Which of the following is not a permissible operation(a) *p++(b) ++p(c) (*p)++(d) All2.What is the output of the following code:- void print_arr(float **p){printf(" 0 %f 1 %f 2 %f\n",p[0][0],p[0][1],p[0][2]);}void main(){float arr[2][3] = {{0,1,2},{3,4,5}};float **fl_arr;fl_arr = (float *)arr;print_arr(fl_arr);fl_arr++;print_arr(fl_arr);}(a)(d)segmentation…
Pattern1) 60 questoins on CMainly qustions on Poniters in C - yashwant kanetkar C questions based on commnad line arguments data structure ( BST, tree traversals)2) Logical Reasoning - R. S. Agrawal LR is sufficienttest comprises of 2 sections, technical ( C ) and logical reasoning.. technical is for 60 mins, 60 questions...logical reasoning is for 30 mins,17 questions.... ..all the questions were like " what is the output of the following program segment" and in many questions 3rd and 4th choices…
Sample InterviewIn the interview, they asked about Stacks, Queues, Linked lists, Binary Trees. Few questions I remember are:1) If u have a linked list library, how do u design stack and queue using it; write pseudocode.2) What are static variables and functions?3) Write code in C to count the number of 1s in a character (1byte).4) What is pre-order, post-order, in-order; write code to print post-order.5) Can u construct a binary tree given its inorder and postorder details. Is it neccessary or sufficient…
SASKEN Sample QuestionAPTITUDE1. Two people were walking in opposite directions.both of them walked 6 miles forward then took right and walked 8 miles.how far is each from starting positions?a) 14 miles and 14 milesb) 10 miles 10 milesc) 6 miles 6 miles2. a person has certain number of cows and birds.they have 172 eyes and 344 legs.how many cows and birds does he have? 3.a person has 14 red socks and 14 white socks in a drawer.what is the minimum number of socks that he should take to get a correct…
Sasken Sample Test Paper. Aptitude Two people were walking in opposite directions.both of them walked 6 miles forward then took right and walked 8 miles.how far is each from starting positions? a) 14 miles and 14 miles b) 10 miles 10 miles c) 6 miles 6 milesa person has certain number of cows and birds.they have 172 eyes and 344 legs.how many cows and birds does he have? A person has 14 red socks and 14 white socks in a drawer.what is the minimum number of socks that he should take to get a correct…