No. 1 Fresher Jobs Website in India.
Are you employer? Register to Post Jobs Login
Search Jobs

RRB Placement Paper 31 December 2010 by RRB(Railway

Details of RRB Placement Paper 31 December 2010 by RRB(Railway conducted by RRB(Railway for job interview.
Share Us With Others
Q1: With the help of a sketch, define station limits for B class stations equipped with Two Aspect signalling on single line and double line sections.

Q2: What are the classifications of stations in Indian Railways?

Q3: What do you mean by Read Back Technique in Railway signalling? Please cite few examples of this technique being used in your Railway.

Q4: What is the difference between A Marker and A Board in Railway signalling?

Q6: What do you mean by the S Marker and where it is being used in Railway signalling?

Q5: What is the normal aspect of a signal in Automatic signalling territory? Q6: What do you mean by Slip siding and Catch siding? Write down cases when Slip siding and Catch siding are required to be provided in the Railway system. Q7: In Indian Railways, what are the systems of train working adopted? Please also mention the name of the most widely used system on Indian Railways.

Q8: Please prepare the locking table for Lever numbers 1, 3, 4, 6 & 7 of the following

Q9: What are the essential requirements of the Absolute Block System?

Q10: What are the standards of interlocking prescribed in Railway Signalling? Q11: What are the different classes of LC ates? Please explain.

Q12: What do you mean by the term Route Holding in Railway signalling? Please explain the various means to achieve the same.

Q13: What do you mean by Loose and Tight locking in Railway signalling? Please explain with examples.

Q14: What do you mean by Ballast Resistance? What are the minimum permissible values for the ballast resistance in the station yard and in the Block section?

Q15: What do you mean by the staggering of adjacent track circuit rail polarities and why is this required?

Q16: List the names of various types of traction bonds used in RE area using DC track circuits.

Q17: Write down the adjustment of DC track circuit for failsafe and reliable working.

Q18: What do you mean by Fouling Protection of Track? Please explain.

Q19: What is Dead Section in track circuit area and how can it be eliminated? Q20: What do you mean by cut section track circuit and/or fed over track circuits?

Q21: Can an AFTC be used in a track section with steel sleepers? Why? Q22: What do you mean by End Fed and Centre Fed types of AFTCs along-with corresponding maximum permissible lengths of track circuits? Q23: What are the various types of Bonds being used in AFTCs?

Q24: Please list the names of the constituent parts of a Electrical Lever Lock and its functioning.

Q25:: What do you mean by Indication Locking and Track Locking and on which levers these are being used?

Q26: Explain the working of Snubbing Circuit in Point machine operation using 3-wire control.

Q27: What is the concept of Cross protection in signalling circuits? Please explain.

Q28: Explain the working of 4-wire point detection circuit using circuit diagram.

Q29: What do you mean by super imposed detection of points? As per the latest directives of Railway Board, is it suggested to use this arrangement?

Q30: Write down the general features of IRS Rotary Type point machines with 143 mm stroke.

Q31: Explain the working of Point operation circuit using Siemens Point Contactor unit in an electromechanical installation.

Q32: What do you mean by RHS and LHS turnouts? Can we use the same type of Point machine (IRS Rotary type) for both the turnouts? Please explain. Q33: Compare different types of conventional signal lamps.

Q34:: What are the different types of ECRs being used with conventional signal lamps?

Q35: What are Triple Pole lamps? Describe their merits over Double pole lamps.

Q36: What do you mean by H-Type, I-Type and L-Type signal transformers along-with their uses?

Q37: What is Aspect Control and Aspect Control circuits? Draw an aspect control circuit for an inner distant signal in Double Distant signalling territory.

Q38: What is cascading of signal aspects? Explain with suitable circuit diagram.

Q39: What do you mean by Red Lamp Protection? Expalin with suitable diagrams.

Q40: What do you mean by Cutting in Arrangement in signalling circuits and reason for its use?

Q41: What do you mean by Direct Feeding, Local Feeding and Remote Feeding of signals? Explain.

Q42: Describe the advantages of LED signal Lamps over conventional signal lamps.

Q43: What are the various PVC signal cables used in Railway signalling in SECR? Are they screened one or not?

Q44: What do you mean by cable meggering? Please explain.